DMC thermosetting material parts manufacturer advantages and disadvantages of the molding process has the following advantages: 1) because there is no pouring system, small loss of raw materials, etc. 2) because the pressure of the plastic in the cavity is more uniform, the pressure generated by the flow distance is short, DMC thermosetting material parts deformation is small, flow direction more. Therefore, the internal stress of the product is very low, making the warpage deformation of the product is also very small, mechanical properties are more stable. 3) Especially suitable for forming thin-walled products that can not be warped, can be used to form large flat bottom cosmetics and basin-shaped products. Forming also has the following disadvantages:

1) For complex products with depressions, slopes or holes, the forming method can be used from time to time, as moulds are required and the mould structure is complex. The mould pins and side cores of DMC thermoset parts may bend or even break when the melt is flowing under high pressure.

2) Due to the high viscosity of the melt of the general moulding material, problematic moulds may occur when the DMC thermoset parts are completely filled. In order to ensure that the melt can adequately fill the mould, the moulding material must be preformed into a blank with a special shape. This is particularly important when the mould does not provide a means of confining the moulding compound to a specific moulding compound.

3) When the curing phase is over and the mould is opened to remove the product

The different hardness of the product is an important issue to be considered.SMC materials in building products.1. SMC whole houseIn industrial modernization, DMC thermosetting material parts whole bathroom represents the overall level of residential construction in a country, and now most of the homes have gone to a well-off scale.

Combined. 2. SMC seat SMC seat has good design, DMC thermosetting material parts corrosion resistance, high strength, no pollution, waterproof, smooth surface, beautiful colour and other characteristics, widely used in parks, stations, buses, stadiums, airports, etc.

3. Combined water tank SMC combined water tank consists of SMC moulded veneer, DMC thermosetting material parts sealing material, metal structure and piping system, bottle. The tank does not leak, light weight, good water quality, long service life, no water pollution, beautiful appearance, easy to install. Widely used in hotels, restaurants, residential, office buildings and other water storage facilities. If you have any questions welcome to call Ruirui Electric Manufacturing Factory.